7dev7random7

I fear this may be the case but since I am not an engineer thought about pulling some opinions here thumbsup

Didn't thought about a weak seam either! I find that my 4 mm stitch length doesn't look good and I wanted to have 1 or 2 mm more.

Thank you very much. You have correctly deduced the sliders, yepp.

Re-engineering would indeed be a fun project and that's why I was asking for advice.

Stitching by hand didn't even cross my mind so thank you for thinking out of the box! :)

I understand you know how to change the step length that can be changed now, yes?

Yea

You say <2mm to 5mm. My very similar machine can go to almost 10mm but it cannot keep the thread very tight.

I would die for 10 mm. I would be in to adjust the machine while sewing for any step lenght larger then 5 but 10 mm would be perfect.

This is the limiting thing, the machine, every part, is designed for sewing a length of 2-8mm or whatever. A longer stitch step would need a complete change and probably a stronger motor.

I can change gearings, leverages and axles if I understand what to communicate. I am not bound to the current chassis and motor. I can construct a chassis afterwards rezpecting current alignments within nm.

By moving the knob or lever that changes the stitch step length, you will see what is going on.

I circled the change in blue. Leveraging the handle could be the case but axles wind on their own. It is a mind fuc* which can only be put in perspective by Engineers, imo.

Edit: you edited before me!! But I don't adress it yet, since you explain the context more professionally. Thank you in this regards.

The machine is more then 40 years old. I attached the photo. The right handle adjust the zick-zack-width (I had to adjust the chassis to get it zero'd) and the left handle puts the needle 'left'/'middle'/'right' in the feet.

collapsed inline media

I had to cut some chassis on the right handle to the left and adjust the internal screws so that the axle of stitch width is exactly above the front-needle of the geering. It wasn't exact with a straight stitch prior to this.

I may add again: Me or my friends are capable of changing any axle or gearing to nm but I do not know what to request in the first hand. Engineering is very, VERY, hard.... :(

What thing in my machine is limiting my machine step? The rotation on the inside axle?)

I see your point and I just fixed my spelling mistakes for the third time. Please refer to my comment; I wrote this due to an emotion.

It is clear to me that a more powerful motor would not change my step-width. While writing I wanted to offend people.to answer but when issuing the send-button I was questioning my own words - as always.

Hitting two times submit on the summit app may raise two comments. Sorry.

On both pictures I have hands on the clutch. Enlarging the motor doesn't make sense after reading my own post.

The leverage enable me to fluidly adjust the step-length.

If you explain it correctly, I can do any adjustment but please raise any requirements which raise to you head.

Initial the pictures could not be loaded so I did a comment. I deleted and reused it for this comment.

That's a projection. I stated that either cultures are mixed or we split by ethics and opinions.

I just talked to my superior about the most urgent thing EU countries are facing currently. I should add that he is 100% disabled but studied in CS and reads everything which is interesting to him and his world view.

When I said that social media dictates the discussions and the media, we agreed on the thought after a short period.

And if we could solve this issue we mostlikely would get awarded a noble price.

What I am trying to say: Social media is run by - at least - flawed people. And used by the evil ones to their maximum, putting the honest Ones into a position to explain.

We are loosing our discourse, we are mixing our cultures - or we split at our ethics.

Social media is a cancer with no current treatment. Civilians will be in favor of social media since it also benefits society directly. But we are diminishing other things with it.

Maybe there will be one more brilliant mind educated who may aid us in these times.